Correct Usage of Sodium Hypochlorit

Usage method of sodium hypochlorite includes the six steps such as wearing, diluting, scrubbing, standing, flushing, discarding, now welcome the responsible person of the sodium hypochlorite factory to give a brief introduction:

1.「Wearing 」:

Wearing apron, mouth mask and gloves to protect your both hands.

2.「Diluting 」:

Diluting the bleaching water and changing the diluted concentration as per the actual sterilization places.

3.「Scrubbing 」:

Use the way of scrubbing or soaking to disinfect, don't use spray, and must keep ventilation.

4.「Standing」:

Standing for 5-10 minutes after the scrubbing, waiting to see the function of bleaching water. Duration of exposure regarding immersion disinfection may be over 30 minutes.

5.「Flushing 」: Flushing or scrubbing the cleaned and disinfected area with water.

6.「Discarding 」:

Discarding the remaining bleaching water by following methods. Sodium hypochlorite will be gradually diluted over the time, thus the remaining bleaching water shall be discarded after 24 hours.

(1) Again dilute the used bleaching water with plenty of water and pour them into kitchen sewages or outdoor ditches to avoid water source contamination.

(2) Tightly seal the bleaching water, pour the automatically oxidized bleaching water later.

The above is the correct method of sodium hypochlorite introduced by the responsible person of the sodium hypochlorite factory, I wish that the above introduction can facilitate your understanding of the products.